Emergency Service

    Garage Door Track Repair in Denver

    A garage door off its tracks isn't just inconvenient — it's dangerous. The door can fall unexpectedly, damage your vehicle, or injure someone. We treat off-track doors as emergencies.

    Whether your tracks are bent, misaligned, or your door has completely derailed, we diagnose the cause and fix it right the first time. Most repairs completed same-day in Denver.

    Track Repair Service in Denver CO

    Rapid Response

    Off-track doors are emergencies. We prioritize these calls and often arrive within 1-2 hours in Denver.

    Root Cause Repair

    We don't just reposition the door — we fix the underlying issue so it doesn't happen again.

    Same-Day Resolution

    Most track repairs finished in one visit. We carry replacement parts on our trucks.

    Your Track System Explained

    Your door relies on several interconnected components to operate smoothly:

    Vertical Tracks

    The upright sections on each side of the door opening. They guide the door as it rises and must be perfectly plumb.

    Horizontal Tracks

    Run along the ceiling, parallel to the floor. The door rests in these tracks when fully open.

    Curved Tracks

    Connect vertical to horizontal sections. This transition area sees the most stress and is often where problems start.

    Track Brackets

    Mount tracks to wall and ceiling. Loose brackets cause track shifting and misalignment.

    Rollers

    Small wheels on the door that ride inside the tracks. Worn rollers are the #1 cause of off-track doors.

    Hinges

    Connect door panels and hold the rollers. Broken hinges cause rollers to bind or pop out.

    Track Problem Warning Signs

    Catch these early and you can prevent your door from jumping the track entirely:

    Grinding or scraping sounds

    Rollers may be binding in tracks or tracks may be misaligned.

    Door moves unevenly

    One side may be coming off track or rollers may be worn on one side.

    Visible gap between rollers and track

    Track may be bent outward or roller is starting to pop out.

    Door shakes or vibrates

    Track misalignment, loose brackets, or worn rollers causing instability.

    Door is hard to open manually

    Binding in tracks often precedes complete derailment.

    Door appears crooked

    One side has jumped the track or cables are uneven.

    What Causes Off-Track Doors?

    Understanding the cause helps us fix it right and prevent it from happening again:

    Worn Rollers

    The most frequent cause. When roller bearings wear out, the wheel wobbles and can jump the track.

    Solution: Replace all rollers — they wear evenly, so if one is bad, others are close behind.

    Bent Tracks

    Impact damage from vehicles, ladders, or even someone leaning against the track.

    Solution: We straighten minor bends or replace sections that are too damaged to repair.

    Loose Brackets

    Vibration and age loosen the bolts holding tracks to walls and ceiling.

    Solution: We tighten all hardware and use thread-lock compound to prevent future loosening.

    Broken Cables

    When a cable snaps, the door drops suddenly and can jump off the tracks.

    Solution: Replace cables and inspect drums, then realign the door in the tracks.

    Broken Hinges

    Failed hinges allow rollers to rotate out of alignment with the track.

    Solution: Replace damaged hinges with heavy-duty replacements rated for your door weight.

    Obstruction

    Objects caught under the door or in the tracks force the door out of alignment.

    Solution: Remove obstruction, inspect for damage, and realign door and tracks.

    Our Track Repair Process

    1. Secure the Door

    First priority is safety. We clamp the door in place so it can't fall while we work.

    2. Diagnose the Cause

    We identify WHY the door jumped the track — not just that it did. This prevents repeat problems.

    3. Inspect All Components

    We check tracks, rollers, hinges, cables, and springs. Off-track doors often have multiple issues.

    4. Make Repairs

    We straighten bent tracks, replace worn rollers, tighten brackets, and address all issues found.

    5. Realign the Door

    We carefully guide each roller back into the track, ensuring proper seating.

    6. Test & Adjust

    We operate the door multiple times, adjusting track spacing and alignment for smooth operation.

    Preventing Future Track Issues

    Simple maintenance can prevent most track problems. Here's what we recommend:

    Lubricate tracks and rollers every 6 months with silicone spray
    Check and tighten track brackets annually
    Replace rollers every 5-7 years before they fail
    Keep tracks clear of debris and cobwebs
    Test door balance annually — door should stay in place when half-open
    Address grinding sounds immediately — they get worse fast

    Track Repair Questions

    Door Off Track? We Can Help

    Don't try to force an off-track door — you could make it worse or get hurt. Call Denver Overhead CO for safe, professional track repair. We're often there within 2 hours in Denver.